95 nissan quest belts diagram - Quest Nissan Cars & Trucks

SOURCE: belts

Timing belt has marks on it that refer to the cam marks and the crank gear. Looking at the engine from the front, the timing belt should drape over the two cam gears, with 40 cogs between them on the belt. The timing belt should have 42 or 43? cogs between the driver cam mark and the mark on the crank gear. The way i've installed mine is to put the belt on the driver side cam and crank, and then put it on the passenger side cam. You'll need to lock the tensioner clockwise about 70-80 degrees to get enough clearance to install the belt.

SOURCE: Will you provide belt diagram for 1996 nissan quest?

There are 2 diagrams available:

SOURCE: I need a diagram of a 1993 nissan Quest ac belt.

DO NOT OVERTIGHTEN BELT. It will break your crankshaft!!!!

The tension for the A/C compressor drive belt should measure 603-691 N (135-155 lbs) for a new drive belt or 495-583 N (110-130 lbs) for a used drive belt. The lower limit for drive belt tension is 196 N (44 lbs).

SOURCE: my surpentine belt on my 95 nissan maxima i need a

HI. I have posted the requested information below.

SOURCE: firing order diagram neededbfor 95 nissan quest

For the 1995 Nissan Quest 3.0L SOHC V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
.......(back)......
1........3........5
2........4........6
.......(front)

Distributor:
....(back)
.......2
3............1
4............6
.......5
...(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!