1994 Dodge Grand Caravan Logo

Related Topics:

Pam Stone Posted on Aug 16, 2012

BELT DIAGRAM FOR 1992 DODGE GRAND CARAVAN LE - 1994 Dodge Grand Caravan

5 Related Answers

Anonymous

  • 80 Answers
  • Posted on Oct 05, 2009

SOURCE: need the belt diagram for 91 dodge grand caravan

Let me know if this help you....


4624d96.jpg

Ad

K W

  • 509 Answers
  • Posted on Jan 03, 2010

SOURCE: I need a diagram for a 1994 dodge grand caravan se

Try this

ec9ce0b.jpg

Testimonial: "you did find the diagram that works, thanks."

Anonymous

  • 2 Answers
  • Posted on Jul 18, 2008

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

Anonymous

  • 1985 Answers
  • Posted on Jan 12, 2010

SOURCE: need serpentine belt diagram for 1994 dodge grand caravan

if you buy your belt from Autozone the belt routing is on the box

Patrick Rayome

  • 1757 Answers
  • Posted on Jan 22, 2010

SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan

3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1994 Dodge Grand Caravan. Does anyone know what could cause the serpentine belt on a Dodge Grand Caravan to come off every time it rains?

Tensioner badly adjusted or pulleys are misaligned.

Take it back to the shop and ask them to fix the tension under the repair warranty.

There should be enough tension that the belt can't jump the pulleys. There is a small chance is is misrouted.

https://www.2carpros.com/diagrams/dodge/grand-caravan/1994

https://www.google.com/search?q=94+dodge+grand+caravan+serpentine+belt+diagram

..
0helpful
1answer

Diagram for 2010 dodge caravan serpentine belt 3.3l

i need to see a diagram for a 2010 dodge grand caravan with a 3.3 liter It has air condtion
0helpful
1answer

Need a routing diagram for serpentine belt 92 dodge caravan le

http://www.2carpros.com/diagrams/dodge/caravan/1992
21helpful
2answers

I need the belt diagram for a 3.3 liter V6 1994 dodge grand caravan le

Heres a belt diagram for your 1994 dodge grand caravan with a 3.3 engine, hope this helpful.1312666.gif
1helpful
1answer

Replace serpentine belt on 1992 dodge grand

Click on the following free direct Link.
It has the correct Belt Diagrams for your 1992 Dodge Grand Caravan wirh either the 3.0L SOHC V6 or the 3.3L V6.

http://www.2carpros.com/car_repair_information/year/1992/make/dodge/model/grand_caravan/1992_dodge_grand_caravan_drive_belt_routing_diagram.htm


Included on the Diagrams are the Instructions on "Rotating" the Automatic Tensioner. See Below for additional Instructions to make your job easier.

"HOW TO": I professionally prefer the Serpentine Tensioner Tool.
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s).
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening located on the Tensioner Arm) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Before You GO:
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

0helpful
1answer

I am trying to put on the engine belt for a 1992 Dodge Grand Caravan with a 3.3L engine with air conditioning. Do you have any diagrams that show the positioning of the belt and where are the tighteners to...

54162ee.jpgI normally find it easier to put belt on all pulleys below and then slip it on alternator last, that way I can hold wrench on tensioner with one hand, and slip belt on alternator at same time. Not easy, but if long wrench, or pipe over box-end wrench on tensioner, will make it easier.
0helpful
1answer

1992 Dodge Grand Caravan LE - Power boost for brakes occasionally goes out and will function properly the next day. Is it a relay problem?

check the back blast valve from the vacumn booster in the hose connection where it plugs into the booster and change it
1helpful
1answer

Belt diagram 1992 dodge grand caravan

it's on the passenger side strut tower top under the hood.
0helpful
1answer
0helpful
1answer

I need a 1998 Dodge Grand Caravan serpentine belt diagram.

The belt routing diagram is shown on a decal located on thehorizontal metal support above the radiator and under the hood support rod (passenger's side near the coolant overflow tank).
PT Stanley
Not finding what you are looking for?

1,592 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...