Chevrolet Equinox crankshaft sensor location 2010 3.0 v6

SOURCE: crankshaft sensor location and replacement procedure

It is on the rear of the engine, passenger side. You need to access it from the underside and it is halfway up the block between the head and the oilpan. It is real close to where the engine and transmission meet.

Greg Bernett

• 2993 Answers
• Posted on Mar 21, 2009

SOURCE: I HAVE A 2000 DODGE STRATUS 2.5 V6. WHERE IS THE

Cam is on the end of the block, crankshaft sensor is on the bottom of the block. Both are easy to change....are you changing these due to poor performance or no start condition?

Ned C Cook

• 3433 Answers
• Posted on Sep 28, 2009

SOURCE: need location of crankshaft position sensor on a

The crank sensor should be found at the front by the crank pully. it is bolted to the engine wuth a wire connection plug on it.

Harvey N Tawatao

• 3854 Answers
• Posted on Dec 16, 2009

SOURCE: where is the crankshaft sensor located on a 1998

The Crankshaft Position Sensor (CKP) is located at the lower front of the engine on the engine front cover, also called the timing cover. Through a use of magnetic pulsation, the CKP sensor provides the PCM (control module) with a crankshaft position signal. The PCM uses that signal to determine the spark sequence (firing order) for each cylinder. It also uses the signal to precisely control ignition timing and calculate engine speed, etc. Easy fix and clean the area out first with brake cleaner before working around that area and take care not to break the tab on the wire harness that connects to the crank sensor. Good luck

Testimonial: "That was fast,simple and easy to understand. Thank you very much."

SOURCE: Where is the crankshaft position

look on side cylinder block beside starter.you have to remove the starter to remove the crankshaft sensor.