Where is the crankshaft position sensor located on a1999 cadillac seville

crankshaft position sensor ( the engine only has one crankshaft)
camshaft position sensor




https://www.vehiclehistory.com/questions/whats-the-2009-cadillac-cts-crankshaft-position-sensor-location-286477


https://www.youtube.com/watch?v=qhDcT-FtOHE

https://www.fixya.com/cars/t26910038-camshaft_positioning_sensors_locations

Fuel injector is on the fuel rail coil packs ontop of the plugs

The crank sensor is located at the driver side rear of the engine. it is bolted to the transmission bell housing. Here is a diagram of it's location.


Click on link for location diagram. http://ww2.justanswer.com/uploads/baddad1/2012-01-11_220732_capture.png

Under hood, center, lower engine area, abovecrankshaft position b sensor, mounted onfront of engine
Application:
A sensor,under hood ,center, lower engine area, above crankshaft position b sensor mounted on front of engine , cam shaft sensor is located on the upper portion of engine on front of motor , you really have to look for it. its a tuff one to get at.

This answer covers 1999-2005 Cadillac Deville, Eldorado & Seville.
Example Engine:
2002 Cadillac Seville STS 4.6L SFI DOHC HO 8cyl.

This engine has (2) Crankshaft Position (CKP) Sensors: the Upper sensor is CKP sensor B, and the lower sensor is CKP sensor A (this is included for the OBD-II DTC codes - P0385 references Sensor B = upper CKP sensor, whereas P0335 references the lower CKP sensor (sensor A)).

Both crankshaft position sensors are located in the front of the engine just above the oil filter adapter. To access both CKP sensors, jack up vehicle on the passenger side, remove the oil filter, and the oil filter adapter, including the Engine Oil Pressure (EOP) switch. See illustration.

The ARROW points toward Front of Car.
1. Upper Crankshaft Position Sensor (B).
2. Lower Crankshaft Position Sensor (A)
3. Engine Oil Pressure (EOP) switch
4. Engine Oil Level switch
The Oil Filter is the can-type object below the oil filter adapter, which includes the EOP switch. Recommend: remove oil filter with an oil filter socket/strap wrench, since it's close to the oil pan.

This is for the crankshaft position sensor "B". I would do another internet search with the complete description, "2000 cadillac seville crankshaft positioner "B" " and see what comes up.

You may be able to find instructions or photos from a repair manual. You can see some parts by using the online sites of the Autozone, Advance, and Oreilys sites.

I hope my solution is helpful.

no they dont

just one its either on the tranmission bell housing or on the crankshaft pully.

a 1989 cadillac cadillac sevilli has a 4.9 v/8. throttle body fuel injection. this engine does NOT have a crank or cam sensor

4.6 the twocrankshaft position sensors are located on the front of the block just above and to the left of the oil filter. not hard to replace.