NEED ACTIVATE READ OF CODE 128 IN NCR 7872 SCANNER

Amigo, estoy buscando lo mismo que tu y quisiera saber si ya lo encontraste mi correo es [email protected]
GRACIAS

Hello Mathew,
the USPS barcode is the GS1 128 (Code128) that will help you by activating accoring to the manual. Please be sure that you enable all lenghts of the Code128 barcode. That is probably the issue.

First determine if the problem is the scanner or the register. Switch scanners with another one, does the problem follow the scanner?
Could be the cable, interface card on teh scanner.
If the problem stays at the register and you tried a new cable, the register is the problem.

we've had the same problem and usually it is a programing issue,Go to the MFG website and get the barcode program and that should help

On a 7876, you need to scan the sequence “17130” is to add 128 tag readability. Not too sure if the 7875 is the same.

Sounds like you need an updated driver for your POS scanner.

Other than that, try checking the scanners setting your software and make sure it is set for 39 and 128 bar codes. There is usually a setting that will specify what codes the scanner is going to read.

You can always shoot an email over to the datalogic guys and see if they have any more input on the situation.

i lost my scanner installation disk for model NCR-7837, how can i get it to install?

ftp://www.scansourcela.us/NCR%20Retail%20Systems%20Latin%20America/NCR%207872/7872Installation%20Guide.pdf

aqui estas el manual quisa te ajudas con to problema.

Hello

This problem can be solved with some configuration that there are tags for 7875-2000 NCR scanner, what is here is the set of EEPROM targeta NCR scanner that brings you to continue to double reading of products