Call service 6000: 0147270

It means that the path the paper follows that there is either something stuck like a wrinkled or torn piece of paper in the path and needs to be removed before it can send another paper or it will keep jamming you didn’t give name of model but if it’s this one try page 4-5

https://cdn.kyostatics.net/dlc/eu/documentation/usermanual/fs-2000d_3900dn_4000dn.-downloadcenteritem-Single-File.downloadcenteritem.tmp/FS-2000D%203900DN...G%20(ENG)%201.3.pdf

Call service message 6000 in Kyocera is a fuser error code. The fuser must have gone bad.

Regards,
Shrey

Error code 0150 is an engine EEPROM communication error. The engine board might need to be replaced. I have heard that sometimes a defective developer unit could cause this same error code. I would try swaping a develper from a working FS-2000D first.

clean all the rollers... with isoproyl alcohol... it sounds like the feed rollers aren't picking up... if that doesn't work you will have to have the feed rollers replaced...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

It is a "mechanical error". The part after the colon is the number of pages printed. It's probably worthwhile taking the trays, toner and cartridge out and opening all the access doors and checking for something obvious before calling in an engineer.

I have heard that 7410 is a standard code meaning the drum is out of position. Seat the drum correctly and away you go.
David
www.copycare.net

that is a fuser code check the fuse

The files called 2000sys.zip & 2000_eng.zip I beleive, if that helps. I bet after you have updated the firmware, you will find the serial number absent from status page, muz get corrupted when the engine firmware chucks the 150 error, Just thought I'd say although is not norm a problem

Oh, It only ever does the 150 once, never if firmware is updated.

Hi, switch off printer ,just open cover(door) on the left side of the machine and push Drum Unit in machine(to proper seat)
You have to hear "click" sound.Switch on printer.
Regards...

Hi,

A downloadable copy of the Kyocera Mita FS-1010 user manual is available here.

Good luck and kind regards.

Thank you for using FIXYA.