G5 replacement plates

Your old valve plate can be repaired. Usually only one or two reeds break. Carefully trim off broken reed exposing port hole. Tap hole with fine thread and make plug with proper matching bolt. plug should be same thickness as plate. Thread in plug using thread locker then ping in several spots. Works without loss of volume. You could also replace the reeds. Good luck..

there is a belt on bottom its broke

PSU problems.?

why not ask on the real forum at HP?



https://h30434.www3.hp.com/

Go to gmail and start creating a new account (Click Create an account).
At the "Desired Login name" use the one you want to check and press "check availability".
Gmail will tell you if this account is taken or not. (Taken means "still exists" in your case)

[email protected]

Go buy a new one for $40 at Walmart - KEEP YOUR RECEIPT AND PACKAGING!

Wait one week and simply put the damaged MJ back into pack and return it (within 90 days of purchase)- the store gets credit and you get a new jack, phone #, and your year of service begins anew - no one takes a loss - store gets credit and you don't have to mess with MJ's non-existant customer service -

Note: I have done this 2 times as I get VERY POOR QUALITY CONNECTION on MJ and still cannot figure out a way to improve my connection quality- any suggestions??

The G5 Series is fairly new, if you're within warranty, call 1800-okCompaq.

Could be a bad cable, a bad monitor, or bad computer hardware. Any display at all or any beep codes?

On the back, the ml350 G5 will likely have an additional Network interface jack-- this may be labeled ILO. The ILO network connect allows you to use another PC on the same network to access this system (like a remote control via VNC or RDP) even if it won't power up--literally. Inside the ILO page, (you'll need the IP address of the ILO, the default account is administrator, and the default password is listed ona paper tag attached in the rear or on a sticker. If you can get into ILO via web browser: https://ipddress of ilo, you can check the Integrated log, which can shed some light on any failures.

They come up on ebay frequently.

called salton and ordered new handles for the plates

Yes - go to this link: http://www.appliancefactoryparts.com/gasgrillparts/brands/george-foreman/g5.html#Other%20Products I'm almost considering just buying a whole new foreman since the replacement parts are not inexpensive.