Good morning I have a question over Symbol GUN MC9090. Some body as tell me the F% key is reserved from Symbol. The end user can't ise it. Is true?

Unless you really know what you are doing with regards to ESD protection and sourcing the correct part I would not recommend it.

Contact a reputable repair company like www.portablesolutions.com

hi,
Sound like you need to look at your Keyboard mapping files, easiest way to fix this is to use Motorola System Configuration Manager - Downloadable from the Motorola website.
If the unit need to be restored to factory defaults, than a fast way is to run the Clean boot files from the SD Card also downloadable via the Motorola site - search for 'MC9090 Clean boot'

Take out the battery, press and hold the power button and trigger for 30 sec and push back the battery the release the buttons.

my problem is in the configuration of symbol MC9090 in comunication with sap when send function Key ( F5) .

Question .

What the value that the SAP waiting this process?

http://support.symbol.com

go to the link above, type in the vs of the mc9090 that you have, for example, firmware upgrade for mc9090-g

let me know if you need anything else

Kim Ganoe
Datex Corp
800.933.2839

http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=7221506apdf&sliceId=&dialogID=166922927&stateId=1%200%20166920425

will show you pictures of both keypads, starting at page 75

let me know if you need me to e-mail this to you

[email protected]

Hello, if you go to support.symbol.com and download the mc9090-g users guide, it will walk you through changing your display settings

http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=7221506apdf&sliceId=&dialogID=165472011&stateId=0%200%2019451184

if you need assistance please let me know
Kim Ganoe
800.933.2839 x251

You need to contact the Wavelink Help Desk...http://www.wavelink.com/support.aspx

They can walk you through it.

Cheers..

Billy Barcode

check in your router MAC security
if in your router MAC security is enabled then only those can connect whose MAC addresses are in allow list in router.

you can access your router with following link

http://192.168.1.1
or
http://192.168.1.0

for belkin router
http://192.168.2.1

type user name as "admin" and password as "admin" or blank or "password

then go to wireless advanced security then check MAC security if enabled then add your moto MAC in allow list.
Let me know .

Barreralu - are you in need of any more Symbol MC9090's? I have refurbished models that are in like new condition.

If you need your current ones repaired I can do this too.

Give me a call in the morning.

Joe

Joe Anselmo
Legacy Technology Services Inc
(847) 621-3300 ext. 418
Email: [email protected]