Naxa remote - Televison & Video

To program your RCA universal remote to control your Naxa DVD player ND-861, you will need to use the correct code for your device. Here are the steps to follow:

Power on your Naxa DVD player.

Press and hold the "Code Search" button on your RCA universal remote until the indicator light turns on.

Release the "Code Search" button.

Press and release the "DVD" button on your RCA remote.

Enter the code for your Naxa DVD player. You can find a list of RCA remote codes for Naxa DVD players in the RCA remote manual that came with your remote or by searching online. For example, the code for Naxa DVD players may be 3394.

Press the "Enter" button on your RCA remote. The indicator light on your remote will turn off if the code was entered correctly.

Test the remote to see if it's working. Try playing a DVD and using the remote to navigate the menu.

If the first code you tried didn't work, repeat the steps with a different code until you find one that works. If none of the codes work, it's possible that your RCA universal remote is not compatible with your Naxa DVD player.

Hi Dawn
There are many Remote Control Sites out there

http://www.replacementremotes.com/NAXA/Remote-Controls/

Cheers

Hi.
Unfortunately, naxa tv's aren't compatible with universal remotes, as they use a proprietary coding system for their tv's.

Your only hope is to contact Naxa's support department at [email protected] to ask about replacement remote.
This is directly from their website about the incompatibility with universal remotes.

I know you were hoping you could use a universal remote for your tv, but sadly that's not the case here.

I wish I could have given you better news, but it is the way they designed their sets, that's why universal's don't work.

I hope this helps you out in knowing what to do now, and have a good day.

Look at;
http://remotes.com/store/emerson/ld200em8.html

you can get a new manual here:

 

http://www.naxaelectronics.com/index.php/pages/4/

i install uverse, the auto seek is done by hit and hold TV and OK. wait for lights to flash enter 900 and push play over and over SLOWLY and when the tv turns off, press enter.

NOTE: some tvs WILL NOT program to our remotes

Yes, you can. I was able to get my Dish Network remote to work with my Naxa 574 TV. Just follow the directions for the remote and you should be able to use it.

call for a factory remote at1-800-736-6837

Have a naxa 13in. tv/dvd need codes for remote.