Our old garden way chipper has been eating up belts lately. We need an owners manual. The model # is 15014N and the serial # is W836406.

try this web sight, i make no promises but they have came threw in the past many times....good luck

http://www.manualsonline.com/?src=12022010

If you e-mail me, I can send you a PDF of the owner's manual. Write me at [email protected] and ask them to forward it to me with your e-mail address.
-David Grist, Gardener's Supply

The 3 models of Troy Bilt chippers are on this page:

http://www.troybilt.com/webapp/wcs/stores/servlet/category2_10001_14102_54996_54992_54992_-1

Click on the picture of your model and you are given the option of downloading the manual. You need the serial number of your machine to do this.

Hope this helps!

Hi and welcome to FixYa. I am Kelly. You will need both your model number and serial number but you can get a manual at the link below that you can print.
(Most model and serial number plates list the model number, then a dash / hyphen, and then the serial number.) There is no other source other than a Toro Distributor for Owner's manuals or parts manuals. You can look up on line replacement parts on numerous sites.

Manual: https://lookup3.toro.com/request/request.cfm

Thanks for choosing FixYa,

Kelly

Hi and welcome to FixYa. I am Kelly.

Go to this site:

http://www.brentchalmers.com/

I note your looking for the Super Tomahawk. If you can come up with a model number I think I can find your parts manual for sure. (or at least an on-line parts list.) Also.... If you can come up with an engine number like OH120 or L90 off of the engine I can find you a manual for the engine also.

This is the list of Manuals available there:

1983 W-W Grinder Inc. Manual and Parts List Super Tomahawk 5-8-2G/C and Tomahawk 5-8-2G/M Chipper/Shredder (40 Pages)

1989 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1989 Troy-Bilt Technical Manual 4HP, 5HP, & 8HP Models Tomahawk Chipper/Shredder (12 Pages)

1991 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1991 Troy-Bilt Knife Kit number 1772231 (1 Page)

1992 Troy-Bilt 5HP Model Service Kit (Part Nos. 1901153 and 1901804) For Chipper/Vac (1 Page)

1992 Troy-Bilt Owner/Operator Manual 47260, 47261, 47271, 47272 Chipper/Vac (60 Pages)

1993 Troy-Bilt Sales Brochure Chipper/Vac (4 Pages)

1993 Troy-Bilt Owner/Operator Manual 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (44 Pages)

1993 Troy-Bilt Parts Catalog 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (16 Pages)

1994 Troy-Bilt PTO Chipper/Shredder Owners Dog Clutch Kit 1902404 (1 Page)

Hopefully your model is one of the above.

Here is link to the Parts manuals:

http://www.partsandservice.com/html/TroyBilt/cs/

There are 90 parts manuals there.

Again with a good model and engine number I can probably come up with your exact manuals.

Thanks for chosing FixYa,

Kelly

I have a owners manual for a Garden Way Chipper/ac Model 47031. Contact me and we'll figure out a way to get it to you. banderson@ptd.net I'm looking for someplaxce to buy the Fan & Chipper Disk Assembly, P/N 1763255. Anyone ave a source?

HI believe that we have a 47287 8 hp chipper/vac where would i find Model on chipper vac

Go on line to " PartsTree.com" Start your search by clicking on MTD. Go to chipper/shredders, and fine your Model number, It's listed. In the search window- type in chipper blade. Also, on the drawing schematic of the machine, the blades are # 31 in the list of parts. I looked up the 2005 model. There are are few years with the same Model #.

my chipper had problem with wiring issue that the battery isn't able to take up the electricity supplied to it.. u know, the conductor between them..
if possible get a manual from reliable-store to fix it urself thats I did

http://manuals.mtdproducts.com/mtd/public/list.jsp?BrandCode=10001 online manuals are available there