Error fatal fs_pm.c 01104 unable to read data page

https://www.copytechnet.com/forums/kyocera-mita-copystar/81970-fs-6525-error-code-f-245-a.html

http://vip.asus.com/forum/view.aspx?id=20081024173658250&board_id=1&model=P5K-E%2FWiFi-AP&page=1&SLanguage=en-us
http://howsolve.com/2011/09/how-to-solve-chassis-is-intruded-fatal-error-system-halted-problem/
HERE ARE A COUPLE SITES DESCRIBES CHASSIS INTRUDED.AND WHAT YOU POSSIBLE CAN DO ABOUT IT.READ IT CARFULY.

hiiii

What does "Fatal Error" mean?
Summary: Printer has displayed a "Fatal Error" message. This simply means a problem has occurred requiring you to take action. It does NOT mean that your printer has "died".
Your printer display or status monitor may read "Fatal Error". This simply means a problem has occurred requiring action to clear.
A "Fatal Error" does not mean your printer will "die". Fatal Error explanations are not usually found in the User's Guide or Handy Reference Guide.

RECOMMENDED NEXT STEP: First, try turning off your printer then turning it back on. If this does not clear the message or remedy the problem, check to see if your printer is on a power strip (or not plugged directly into the wall). For testing purposes, be sure the printer is plugged directly into the wall. Often, the issue is power-related.

Second, if the issue persists after this, write down the message (including the 3-digit error code number) and email us at "[email protected]" or call Oki Data Customer Support (1-800-654-3282) for assistance.

NOTE: If you see a series of letters and numbers(scrolling across the display) after the 3-digit error code, be sure to write these down also and report them when call or emailing Customer Support.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

GO to http://www.gfbm.net/mmr_instructions.htm for step by step instructions to get the page count on this and other Kyocera machines.

231 fatal error is telling you that the data from the chip on the toner cartridge is invalid or cannot be read.

This may happen for one of the following reasons:

1)The printer is unable to read the data on toner chip because of toner dust or dirt inside the printer.
Solution: Clean the printer inside, clean toner slot and drum.. See:Clean your laser printer.

2)Either the toner is not an original cartridge, it is refurbished or refilled, or the chip on the toner cartridge is defective.
Solution: replace the toner, or replace the Chip on toner cartridge.

3)The toner sensor in your OKI is defective.
Solution: Call the support number listed on the printer manual to arrange repair.

This application has encounter a critical error:
FATAL ERROR!
Program: F:\games\lan games\warcraft 1.24.1.6374\war3.exe Exception 0xC0000005(ACCESS_VIOLATION) at 001B:15019B9E
The instruction at '0x15019B9E' referenced at '0x57746E65' Ther memory could not be 'read'
Press OK to terminate application.
Then:
Frozen Throne was unable to locate your CD-ROM drive. Please make sure your Frozen Throne disc is in your CD-ROM drive, then click on 'Retry'.

We had a similar problem with an Oki C7300. It was reading "Fatal Error 121" on the display.

We fixed it by simply unplugging the printer from a surge strip and plugging it into the wall directly. After that, the error went away and has not come back.

Technical Support You may contact Kyocera Technical Support Monday - Friday 9 am - 6 pm EST at:

1-800-255-6482

fatal earror when come the your cd has been corrpated if data cant read from the cd then fatal earror come