Husqvarna dongle driver error e009

Check the specifications on your sewing machine. Most machines have not yet been upgraded to use Windows 10.

I used this link for the same problem. Download and install. Resolved my problem immediately.
http://sentinelcustomer.safenet-inc.com/DownloadNotice.aspx?dlD=8589947873

I tried the Husqvarna Viking dongle drivers for 4D VIP Customizing software on a new Windows 8.1 system, but nothing worked. (It worked fine on my old Vista system). After a few weeks of frustration, I found this site : http://www.safenet-inc.com/support_and_downloads/Download_Drivers/Sentinel_Drivers/.
I downloaded the Sentinel Driver v7.5.8 (they work for Windows 2000/XP/Server 2003/2008/2012/Vista & Windows 7&8 (32 bit and 64 bit)), installed it, restarted my computer, and everything worked like a charm.
Somebody should tell Husqvarna about those drivers...

there is an update for windows 7 and dongles at the husqvarna viking website.

From Husqvarna Viking website -

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System

1. Download and install the latest Dongle Drivers.
2. Insert your 4D Dongle.
3. Install your 4D Embroidery System software (and all updates).
4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.

If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

link to latest Dongle Drivers - http://vsmsoftware.net/downloads/HASP/HASPUsersetup.exe

Husqvarna Viking - http://www.husqvarnaviking.com

If you are still unable to get it to work, visit your local authorized Husqvarna Viking dealer. Most stores have staff who are eager to help but you might want to call for an appointment

Good luck..

There is an update for dongles and windows 7.

Info on Husqvarna Viking website - http://www.husqvarnaviking.com


When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System

1. Download and install the latest Dongle Drivers.
2. Insert your 4D Dongle.
3. Install your 4D Embroidery System software (and all updates).
4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.

If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Info on Husqvarna Viking website - http://www.husqvarnaviking.com

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System

1. Download and install the latest Dongle Drivers.
2. Insert your 4D Dongle.
3. Install your 4D Embroidery System software (and all updates).
4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.

If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Info on Husqvarna Viking website - http://www.husqvarnaviking.com

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System

1. Download and install the latest Dongle Drivers.
2. Insert your 4D Dongle.
3. Install your 4D Embroidery System software (and all updates).
4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.

If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Dongle issues - http://www.husqvarnaviking.com/global/8588_4197.htm

Good luck.

I'm afraid there's nothing you can do about the replacement dongle. Have you taken your software and dongle into your dealer and had them try installing it on their computer? Or if you have a laptop, take yours in and see if they can help you. It may just be a matter of downloading new dongle drivers. Do a Google search for 3D Dongle drivers - I think Aladdin has the drivers you need. Also you will need to be running XP or Vista 32-bit on your computer for 3D software to work.

If you are using the 3D version of the Husqvarna Viking software, you may need to download the latest dongle drivers.
If it is 4D, you may need to update the dongle and you can do it yourself.
Check for support at:
http://www.husqvarnaviking.com/us/8588.htm or go to your local Husqvarna Viking dealer.

If you are trying to run 3D on a Vista computer it can be a little complicated. Let me know if this is the case.

The Designer SE software does not use a dongle. If you are attempting a "Smart Update" on the Designer SE and it asks if you use a dongle, just say no and the update on the machine will run.
If you have 3D or 4D software, it uses the dongle and it will be USB. Download the latest driver for your software from the Husqvarna Viking website. The link is through the homepage at Husqvarnaviking.com/us . Click links on the left side of the screen for 4D Software, Help & Updates, and Other Useful Software at the bottom of the page. This will have the latest 3D driver. 4D will require the latest update to the software and a firmware upgrade to the dongle. Run Smart Update on the software and then get the firmware update that is directly below the 3D HASP driver on the Other Useful Software page.