Inability to reach Vivitar Repairs

If you're looking for online magazines, I'd suggest searching Google for different keywords + "guest post" or keywords + "write for us"

For example:
manufacturing + "guest post"
business magazine + "write for us"

Try different combinations and reach out to the places that seem to accept guest posts.

Huntington Beach is a seaside city in Orange County in Southern California.It's called Surf City USA. Area codes: 657 & 714

93504 & 93505 are the zip code of california city itself....
but anyhow u can have a look at the following link to find the exact city in california... http://www.mongabay.com/igapo/zip_codes/CA.htm

Vivitar cameras are known for there inability to function normaly. Alot of these and many more problems I have encountered are manufacturer problems and can not be fixed on your own. the best thing to do would be to contact Vivitar and see if they can give you a refund or replace it. it is best to call but as I do not know the number here is a link to their website. I hope this helps -Richard www.vivitar.com

TDV VISON

This company might be out of business

1001 Lawson St
City of Industry , CA 91748

The Company Internet Site at http://www.tdvvison.com/ is no longer available
(877) US.VISON

There are lots of people that are having problems locating drivers.
I suggest you look for a third party support driver or possibly some downloadable firmware. There is a company called "3 geeks and a mouse" that services and repairs the OLD TDV Vision Lappys. They possibly could provide you with additional support or suggestions.
I hope this helps...good luck.

hi gilda_girl_1, here's a link for the codes in california. just choose which city in california you want to call. good luck! i hope you can make that call...

http://www.50states.com/areacodes/california.htm

If you are not looking for a warranty repair, any shop that handles high end audio repairs should be able to resolve this for you. Before you ship off the pre-amp, verify that it is, in fact, the pre-amp that is defective. The initial stage of the power amp can cause this as well. Try hooking up another pre-amp instead to verify the problem location.

Keep us posted,
Dan

Protron Digital Corporation
921 South Azusa Ave
City Of Industry, California, 91748
U.S.A.

Here is the support site for that model camera... they are located in City Of Industry California now, and they have phone support available. I'm thinking this problem is hardware, and will need to be addressed by a service department:
Go here to download the manual for future reference:
http://www.vivitar.com/ecms.aspx/e65dedb4-5c74-4e09-8110-95947ea5f876/SupportFiles/ViviCam3713.pdf