Changing zones Can't watch different zone movies.

Quite a strange problem. I guess it would be easier just to find a different way of watching movies. For example, I use showbox.zone app for this purpose. Tried a lot of different options but this one turned out to be the handiest and most convenient. So just spend some time exploring all the possibilities you have.

Select a city that has Eastern timezone, such as Indianapolis.

Hi,

Hope this will helped you fixing the time of your Citezen divers watch. Just foolow the instruction below.

Change your Citizen watch's time zone without actually moving the clock hands. On the digital display, change the city that displays on the watch, which sets the time to the different time zone. The Citizen also has a calendar, timer, chronograph and LED lights. Since it is an Eco Drive watch, it is solar powered so you never have to replace the batteries unless its backup power source dies.
Difficulty: Easy Instructions

1. Pull the setting knob (crown) out one "tick" for setting mode.
   

2. Set the mode hand to "WT-S."
   

3. Pull the crown out one more "tick."
   

4. Press the top button on the right side of the watch for the city setting mode.
   

5. Press the lower button on the right side to "SET" the city.
   

6. Turn the crown to select a different city, which changes the time zone.
   

7. Push the crown all the way back in to finish setting the time.
   

Thank you for using Fixya.

mcdevito75 here, Sounds like your watch is showing a different time zone, refer to your owners manual or vist a locl jeweler for adjustment on timeing, setting your watch. Your watch may be set up to show different world time zones, if so, you may have hit a button and now your watch is showing time in a different time zone as an example London / New York.

i have the same problem. i have a rx-v661. i goto the zone 2 settings and try to change the volume and it says VOL FIX. I cannot hear anything out of zone 2. It takes the current volume that is in zone 2, but i cannot hear anything. it has been working fine for at least a year.

If the store you purchased the watch at has not set the time to the correct time zone then obviously the different time zone (UTC in this case) that is showing on your digi face isnt exactly helpful....

Best bet is to go to the interactive watch instructions on www.citizenwatch.com to follow along on how to get it into your own time zone.
Just type in your model number exactly JR3060-59F into the search field. On the right side of the page is the Get Technical Info link..click on this choice. Now on this page is the next link...right side at the bottom of the list> Interactive setting instructions. The page changes again and you see the choice menu. Find Zone Settings...click and follow the instructions (note there is sound to it so turn your speakers on if you have them)

When changing time zones, your watch must be manually set for the new time zone you will be entering. This watch is not designed to adjust for new time zones automatically. Instructions for changing time zones can be changed using the directions found on pages 2-4 in your instruction manual. When changing to and from DST, your watch should automatically adjust for this difference with the next 24 hours after the change. If your watch has not adjusted, you may be in an area that is not receiving signal. Check if your watch has received signal by using the directions found on page 1 of your instruction manual. If your watch has received signal in the past and no longer is receiving signal, your watch may need to be serviced or exchanged. Please contact Dakota Watch Company Customer Service by email at [email protected], or by phone at 1-888-459-0404.

Maybe it's a zone issue. try putting a different DVD from a local video store and see if it plays. Your device might be playing only a certain format.